Sub 600 | Dynaudio
  • Sub 600 | Dynaudio
  • Sub 600 | Dynaudio

Sub 600 | Dynaudio


The Dynaudio Sub 600 brings true Dynaudio sound quality to any Home Cinema or Music system.

The Dynaudio Sub 600 is the most advanced Dynaudio subwoofer available. With its high-performance 300 Watt amplifier and large 30 cm / 12" woofer, the Sub 600 provides serious weight, authority and power for ambitious home theaters, yet remains precise, fast and musical to fully meet the demands of any audiophile hi-fi system.

Delivery in 3-5 days

The sealed enclosure cabinet design and forward firing woofer offer remarkable bass precision while making the Sub 600 relatively easy to position in any room.
Proprietary Dynaudio technology

As a true Dynaudio product it incorporates exclusive Dynaudio driver technology: A light yet rigid Magnesium Silicate Polymer diaphragm, an extra large and extremely powerful double magnet assembly and an ultra-rigid die-cast aluminum driver basket ensure a precise and detailed reproduction of both music and sound effects, while the large, extra-long voice coil and long-throw driver design result in a powerful and deep low frequency performance extending down to 18 Hz.
Critical to the success of any subwoofer-enhanced system is its ability to precisely integrate with the main speakers. The utilization of the distinctive Dynaudio driver technology in the Sub 600 makes system integration with Dynaudio floorstanding and compact loudspeakers especially easy, as each features the same MSP diaphragms - thus sharing the authentic, natural sound reproduction which guarantees a seamless sound integration in the upper bass.

Advanced amplifier electronics

The latest Dynaudio amplifier technology is mated to the exceptionally large woofer of the Sub 600. Delivering 300 Watt output power, the amplifier circuit features select components and was developed in collaboration with the Dynaudio Professional team, itself responsible for some of the finest active monitor speakers available in the studio market. In addition to the high quality and performance, the amplifier circuit incorporates a selectable Auto on-off function, variable gain setting, a variable Low-Pass Filter (50 Hz to 150 Hz), and a selectable phase switch (0º or 180º). The signal can be fed from an AV Receiver's subwoofer or LFE output into the Sub 600's LFE input (1 x RCA), or from a Stereo Amplifier's Pre-Out into the Sub 600's Sat/Sub stereo input (2 x RCA).

A selectable High-pass Filter (Flat, 60 Hz, or 80 Hz) enables the Sat/Sub input to facilitate a seamless crossover integration between the main speakers and the Sub 600. Incorporating a subwoofer to augment the low frequency performance of any stereo or multi-channel loudspeaker system offers an additional benefit: by reducing the strain on the speakers in terms of reproducing extreme bass information, the overall quality of lower midrange frequencies and the overall soundstage reproduction can be greatly improved.
The Sub 600 is also eco-friendly when not in use, as its standby power consumption is less than 0.5 Watt, while a hard on/off power switch is featured on the back panel.

Multiple Subwoofers for advanced setups

The included Slave function allows one or more additional Sub 600s to be connected to the first, or “Master” Sub 600 for advanced Dual-Sub or Multi-Sub systems. Incorporating dual or multiple subwoofers in a system makes it possible to balance out the unavoidable bass nodes one would typically experience through utilizing a single subwoofer in any given room. Bass notes become less directional, and dynamic headroom is increased, even at extremely high sound pressure levels.

•    Sub 600 brings Dynaudio sound quality to Home Cinema and Music
•    High-performance 300 Watt amplifier and 30 cm / 12" woofer
•    Auto on-off function, LFE or Sub/Sat mode, 0.5 watts standby consumption
•    Available in 7 finishes to complement the Dynaudio speaker ranges

Data sheet

350 x 370 x 420 mm
White or black piano lacquer, rosewood, walnut, cherry, maple and black ash
Speaker type
Sub woofer, active
21 kg
Auto on/off mode; LFE or sub/sat mode
Drive Units
1 x 30 cm MSP woofer
Analogue Output
Sat output (2xRCA)
Analog Audio in
LFE (1 x RCA), SUB input (2 x RCA)
Amplifier 300W
Phase Adjustement
0° or 180°
Frequency Response
22Hz - 200Hz (± 3dB)
High-Pass Filter
Flat / 60 / 80 Hz
Low-Pass Filter
50Hz - 150Hz
Enclosure Type