CS6 outdoor speaker | Community Professional
  • CS6 outdoor speaker | Community Professional

CS-6 outdoor speaker | Community Professional


(€275.00 1)


  • Swimming pools
  • Sports stadia, sports facilities Health and fitness clubs
  • Houses of worship
  • Retail environments
  • Cruise ships
  • Corporate training rooms
  • Bars and restaurants
There are not enough products in stock


  • Clean and simple architectural design
  • Same components and voicing as the Commercial
  • Design ceiling loudspeaker family
  • High efficiency, high output, high intelligibility, low distortion
  • Paintable enclosure constructed of high-impact ABS plastic to reduce resonances
  • Front-accessible power tap switch for selectable 8 ohm or 70V/100V operation
  • Low profile pan-tilt mounting yoke included
  • Horizontal or vertical mounting orientation
  • Weather-resistant construction with treated drivers, two-layer powder coated grilles and protected wiring ingress
  • Available in standard black or white finishes

The Commercial Design Series CS-6 is a full-range, compact, two-way system, ideal for installations where space is a premium. Easily outperforming loudspeakers of a larger size format, the CS-6 provides high power handling, high sensitivity and realistic sound reproduction. With a clean and simple architectural appearance that aesthetically merges well in most environments, combined with weather-resistant capability suitable for outdoor use, the CS-6 can be used in a wide variety of speech and music applications. It is equipped with a built-in autoformer, allowing large numbers of distributed loudspeakers to be powered from a 70V or 100V amplifier output. A convenient front- accessible power tap switch is hidden behind a rotatable logo. Installation is simple and flexible using the included multi-angle pan-and-tilt wall mounting yoke which allows low profile mounting and precise positioning of the enclosure in either horizontal or vertical mounting.


Data sheet

177 x 300 x 272 mm
Black or White paintable
Speaker type
Two-way, full-range, coaxial surface mount loudspeaker, 8 ohm or 70V/100V operation
4.1 kg ( 3.2 kg without bracket )
Front-accessible wattage / low impedance selector switch hidden behind the rotatable logo
Drive Units
LF - 1 x 6.5";
HF - 1 x .75" exit compression driver
Driver protection
Self-resetting solid state circuit breaker
4-pole Euroblock connector with two pair of non-interrupt parallel connections
Frequency Response
65 Hz - 13.5 kHz (-10dB) ; 90 Hz - 12.5 kHz (-3dB)
High-Pass Filter
Recommended 70Hz, 24dB/octave
120° conical (+60° / -60°, 1 kHz to 6 kHz)
Axial Q / Directivity Index
4.8 / 6.8, 500 Hz to 6 kHz
Crossover frequency
2 kHz
90 dB SPL (125 Hz to 12.5 kHz 1/3 octave bands) ; 91 dB SPL (250 Hz to 4 kHz speech range)
SPL (Sound Pressure Level)
108dB SPL/ 114 dB SPL( peak 8 ohm)
8 ohm (min 6.2 ohm at 10 kHz)
Continuous Power Handling (Watts Peak RMS)
60W continuous (22V RMS)
Peak Power Handling
150W (43.8V momentary peak)
Transformer taps 100V
30W , 15W , 7.5W
30W, 15W, 7.5W, 3.75W and 8 ohm
Enclosure Type
ABS plastic, matte finish paintable
Dual-layer powder coated steel, black or white finish
Mounting/Rigging provisions
Low profile, multi-angle, pan-tilt mounting yoke
Built-in safety cable attachment eyebolt
IP55 rated loudspeakers, IP56 rated connector cover, designed to Mil Spec 810
Required accessoires
Electronic high pass filter
Included Accessories
Low profile, pan-tilt mounting yoke ; flat-head screwdriver
Optional accessoires
M8 x 15.5mm Blind Insert for 3rd party accessory attachment