MICROdot plafondluidspreker | Audica Professional View larger

MICROdot In-Ceiling loudspeaker | Audica Professional

MICROdot

New

Traditional design of loudspeakers for these applications has been large boxes that give full-range audio, but which are inherently less attractive, more visible or more complex to install, or sub-sat systems that use tiny satellite loudspeakers for mid/high frequencies and a subwoofer for mid/bass. The main problem with sub-sat systems in public spaces is that people are often listening close to thin sounding satellites with the mid/bass rumbling away in the distance, disconnected in bringing the critical mid-band together for audio quality.

More details

126,00 € per 1

Add to wishlist

Data sheet

Dimensions (ØxD)100Ø x 130 mm
Uitgesneden Afmetingen85 mm
FinishWhite (plastic frame and grille paintable)
Weight0,5 kg
Drive Units1 x 50 mm full range
Frequency Response70 Hz - 20 kHz
Dispersion120° conical at -3dB/4kHz
Impedance8 ohm
Continuous Power Handling (Watts Peak RMS)25W
Min. Depth Required130 mm

More info

With the MICROdot we've designed the smallest possible flush mount ceiling loudspeaker to give high quality over a wide audio band so that, no matter where you are in the room, the sound remains coherent and pleasing. For most applications no additional bass loudspeakers are required.

 For applications requiring extended, higher level bass performance, such as an Audio-Visual system playing back film material, the MICROdot can be augmented by the MICROsub 3, which can be carefully tuned just to add extended bass and not confuse the mid-band.

 With all of the MICROseries loudspeakers, aesthetics have been a prime consideration. This starts with the family look, which is softly shaped to merge into the environment. Secondly with the selection of materials, which have to be acoustically excellent but also provide for flexibility of design and quality of appearance. The MICROdot is a single-piece aluminium casting with a micro-perf steel grille for acoustic transparency with durability.

Equally important for aesthetics, and speed and quality of installation, are the fixings and brackets. The MICROdot fits a standard 85mm diameter ceiling spotlight cut-out and is fitted with integral spring-clips. Connection is by means of screw post terminals.

Reviews

Write a review

MICROdot In-Ceiling loudspeaker | Audica Professional

MICROdot In-Ceiling loudspeaker | Audica Professional

Traditional design of loudspeakers for these applications has been large boxes that give full-range audio, but which are inherently less attractive, more visible or more complex to install, or sub-sat systems that use tiny satellite loudspeakers for mid/high frequencies and a subwoofer for mid/bass. The main problem with sub-sat systems in public spaces is that people are often listening close to thin sounding satellites with the mid/bass rumbling away in the distance, disconnected in bringing the critical mid-band together for audio quality.

8 other products in the same category: